V6 Mustang Dyno Graph Database
| Manual Trans Ford Mustang Dyno Graphs | |||||||
| GT-Eater | 2002 | 5-speed | 660 | 583 | SSM lower intake, SSM SPI Upper,SSM 9.2:1 Pistons, Comp Billet cam .579 intake lift and .612 exhaust 108 IC 110 lobe sep, Y2K T-80 turbonectic Turbo,83# fuel injectors - Versa fueler low impedance injector driver,SSM Stage 3 heads with "Gary Mod", Scat 6.125 forged rods, 90MM Acufab TB, MSD Dis-4,Procharger racing intercooler, Custom Delk Turbo, Pro-GF T-5 | ||
| Matthewneuharth (4) Mustang Dyno SAE | 1995 | C4 Auto | 550 | 599 | 4.2L, 8.2:1 compression, race gas, custom turbo kit with 62-1 turbo at 28psi, stock headers, single 3" exhaust, 218/224 (.555/.555 112*) Camshaft, Roller Rockers, Ported Heads and Intakes, Custom box upper intake, 60mm TB, 75mm MAF, Underdrive Pulley, no A/C, no powersteering, 60# injectors | ||
| Matthewneuharth (3) Mustang Dyno SAE | 1995 | C4 Auto | 527.3 | 539.0 | 4.2L, 8.2:1 compression, pump gas, custom turbo kit with 62-1 turbo at 19psi, stock headers, single 3" exhaust, 218/224 (.555/.555 112*) Camshaft, Roller Rockers, Ported Heads and Intakes, Custom box upper intake, 60mm TB, 75mm MAF, Underdrive Pulley, no A/C, no powersteering, 60# injectors | ||
| GT-Eater on Mustang Dyno | 2002 | 5-speed | 487.8 | 464.8 | SSM SuperHeads and lower intake, SSX SPI Upper, 216/224 .520/.520 lift 112 LSA cam, LT Headers, 70mm TB, JBA wires, MAC off-road h-pipe and duals, SSM forged rods and pistons (Standard bore, 8.7:1 CR 3.8L), 1.8 adj roller rockers, Vortech V-2SQ @ 11psi, and wet 50shot of Nitrous, #60 injectors, SCT MAF, #325 fuel pump, Pro-GF T-5, 8.8 w/4.10 gears | ||
| pete on Dynojet SAE Corrected | 1999 | Liberty T5 5-speed | 464.5 | 460.0 | Stock 4.2L Bottomend, Powerdyne 10psi Supercharger, Compucar Dry 25shot, CNC'd heads, 211/211 .523" cam, 65mm TB, Modified stock intake, 1.8 Roller Rockers, JBA Headers, Custom offroad Xpipe, Pro-M 3.5" Univer MAF, 42# injectors, Mach1 Mufflers, Liberty t5, McLeod Clutch, Aluminum Flywheel, PHP 8.8 rear, 3.73 gears, Alum Driveshaft | ||
| studstang99 | 1999 | Tremmec 3550 5-Speed | 438.3 | 439.8 | Stock Heads and intakes, RPM 207/215 camshaft, dual exhaust, Intercooled Procharger at 13psi plus 65hp shot of NX nitrous, 30 over Ross forged pistons, SuperCoupe crank, 310pump, 38pound injectors, 90mm Lmaf, Tremec 3550, 8.8 rear w/ 3.73 gears | ||
| Michael Konor Dynojet SAE | 1999 | Pro-Motion T5 | 411.89 | 391.07 | SuperSix 4.3L bottomend, Vortech SQ2 w/2.87 pulley, 3 core intercooler, Eagle Forged Rods, Wiseco Forged pistons (8.5:1 CR), Delta Cam 220/228 .580 lift 114LCA, SSX Box Upper, Ported Lower intake, SSM SuperHeads (1.85/1.55 valves 256cfm int), 1.8 Adjustable Roller Rockers, Girdle, 42# injectors, 90mm Lightning MAF, BBK 70mm TB, 450lph Cobra Dual pump tank, MAC Longtube headers, 180* Thermo, 3/8" phenolic spacer | ||
| Dave Gilbert (PerfAutoWerks) SAE | 1996 | T56 6-speed | 411 | 386 | Morana 3.8v6 Shortblock, Morange Stage 3 cam and Heads, Custom Morana Intake, ATI Procharger, 42# injs, 255lph pump, LT headers, Dual 2.5" exhaust with cats, 1.8 roller rockers, 4.30 gears | ||
| 95ponycar (Wendy) | 1995 | Stock 5-speed | 408.3 | 382.16 | 3.8L, Wiseco forged pistons, forged H-beam 351W rods, Super Six Stage 3 Superheads, P&P upper/lower intakes, 56mm TB, Crower Cam (216/224, .51/.53 lift 112 LSA), Vortech supercharger, 2.87" blower pulley, 2 Core Air-Air Intercooler, 42# injectors, 255lph fuel pump, 90 MM Lightning MAF, 1.8 Adj. Billet RR, MAC LT's/offroad h-pipe, Bassani exhaust, 7.5” w/ 3:73 gears/t-loc, SCT tune by AZDynoChip | ||
| Dan Haga | 1998 | Promotion G-Force T5 5-speed | 403.1 | 408.8 | 95 3.8 block and crank, Morana main girdle, Eagle connecting rods, Wiseco forged pistons (9.5:1 CR), engine balancing, Super Six heads/lower intake/custom sheetmetal upper intake, 70mm TB, Crower cam (220/228, .521/.521, 114*), Vortech supercharger, 2.5" blower pulley, VMP FMIC, Turbo XS BOV, 30# injectors w/ FMU, 255lph pump, MAC LT's/catted h-pipe, aluminum flywheel, and aluminum driveshaft | ||
| OrangeV6F150 (Rob Radatz) Dynojet SAE | 1997 | 5-speed | 392.5 | 441.4 | 4.3 stroker,Ross 8.5:1 pistons, Eagle I beams, balanced assembly,RPM MXE heads, RPM ported intakes,MP 62-1 turbo @ 9 psi, Pro Charger 3 core intercooler,209/212 cam with .535 lift, custom stainless headers/exhaust, DynoMax bullet 3" muffler, BBK 255lph pump, 42# injectors, 80mm MAF, SCT Tune | ||
| Tehhorse (Russ) Dynojet SAE | 1994 | stock 5-speed | 388.44 | 435.27 | Split Port Swap, stock longblock, 15psi via Custom VMP Twin turbo kit with twin 16g turbos 42lb inj, 255lph pump, 160* thermo,SCT tuned by Justin @ VMP | ||
| MustangAce Dynojet SAE | 2000 | 5-speed | 385 | 428 | Completely stock junkyard 3.8 motor, Velocity Mustang Performance custom twin turbo setup with 16g turbos at 14psi and intercooled, 300lph focus pump, 42 pound injectors, Pro-M Univer maf, 93 octane, SCT Tuned by VMP | ||
| Danny Dent | 1994 | 5-speed | 381 | 395 | SSM Hi-Po 3.8 engine with SSX intake, 65mm TB, SuperHeads, ported lower intake, 216/224, .52/.52 valve lift, 112LSA, 1.8 adj roller rockers, forged rods and pistons (.020" over, 8.8:1 CR), #42'ers, Pro-M 75mm MAF, #255 fuel pump, Intercooled ProCharger @ 13-14 PSI, aluminum flywheel, Stage 3 clutch, ceramic coated MAC long tubes, off-road h-pipe with dual exhaust, auto-to-T-5 swap | ||
| Keith Beddard Dynojet SAE | 1996 | . | 364 | 376 | 4.3L stroker Morana forged stroker kit, Vortech V-1, 2.62 pulley, RPM P&P BV heads and cam, RPM ported lower intake, SSX upper intake, 70mm TB, 90mm LMAF, 42# injectors, Walbro 255lph fuel pump, 3.45's, T-loc, Al DS,Mac LT's, Magnaflow catback, 2 1/2" custom H & hi-flow cats, 1.73 RR's, Kenne Bell Boost-a-spark, SCT chip | ||
| 02whitestang (Spiro) Dynojet SAE | 2001 | 5spd | 362 | 328 | 11psi Procharger, 42lb inj, 300lph pump, SCT MAF, RPM BV heads and RPM cam, LT headers, O/R H pipe, tuned by Justin @ VMP. | ||
| Fordguy6 Dynojet | 1999 | 5-speed | 344.71 | 337.06 | 4.3 stroker, #60 injectors, port & polish heads + intakes, bigger valves, 11 psi pro charger | ||
| 062stang Mustang Dyno SAE Corrected | 2000 | 5-speed | 342 | 369 | t61 turbo .70 comp/.68 turbine (10psi), RPM ported upper intake, home ported lower, halfshafted TB, no EGR, air pump or cats, Underdrive Pulley, 42# injectors, 300lph pump, 3" univer MAF | ||
| Mikenstein | 1997 | 5-speed | 334.3 | 340.8 | Pro-m 75mm calibrated for 30#'s, VMP stage 2 intercooler rated 750cfm/500bhp, VMP powerpipe, Morana 4.2l motor with ported heads, valve springs, B cam, ported lower, supersix stage 3 upper, 60mm tb. Better rods, forged pistons, supercoupe head studs, supercoupe block, Roller Rockers. Long Tube Headers, offroad H, Bassani side exhaust, 9.2-9.5 CR (probably too high), 180 thermo, 3.73 gears, 30# injectors and FMU, Vortech s-trim with 3.1" pulley, seeing 10psi @ 5k and 13psi @ almost 6k. | ||
| Jose98V6 on Dynojet | 1998 | 5-speed | 332.0 | 317.9 | RGR Monster Upper Intake, RGR P&P Lower Intake, RGR P&P Heads (w/stronger springs), RPM-Mustangs Cam (215.7@.49462/224.6@.51757), 60mm Throttle Body, 1.73 Roller Rockers, Better Rods, 255lph Walbro In-tank Fuel Pump, Aeromotive AFPR, 30# Injectors, 75mm ProM MAF, ATI ProCharger 11psi, ATI 2 Core Intercooler, ATI FMU, MAC Shorty Headers, 2 Cat delete, 3" Xpipe, Flowmaster Dual Exhaust, AutoLogic Dynotuned Chip, 160 degree Thermostat | ||
| OneQuickSix on Dynojet | 1998 | 5-speed | 330.8 | 337.1 | ProCharger SuperCharger w/ I/C, EEC-Tuner, 30# injectors, 75mm Pro-m mass air, Off-road h-pipe w/ dyno-max mufflers, K&N air filter, MSD super conductor wires, Ported Heads w/ 3 angle valve work, Ported upper & lower intakes, Custom camshaft by Crower Cams (214/214 .483/.483 110*), BBK adjustable fuel pressure regulator, 59 mm Throttle body, 240 L/H in-line fuel pump, 180 degree thermostat, fel-pro gaskets | ||
| Zani on Dynojet | 2000 | 5-speed | 322.3 | 315.1 | 11psi Procharger, Bosch 42# injectors, 80mm MAF, Walbro 255lph Pump, Jethot coated MAC Shorty Headers, MAC H-pipe, 2 chamber flowmasters, Tuned by FordChip | ||
| AFinley11 on Dynojet | 2004 | 5-speed | 305.22 | 310.53 | Procharger with 13 PSI pulley Intercooled, MAC Long Tube Headers, True Dual Exhuast, 39 lb Cobra Injectors, 310 LPH SVT Fuel Pump,Diablo MAF Extender, CNL Blow Thru MAF, 8.8 Rear End 3.73 Gears and Trac Loc,Tuned by VMPTuning. | ||
| MaestroSC Dynojet, SAE Corrected | 2000 | 5-speed | 304.59 | 301.56 | 11psi Procharger, 80mm Lightning MAF, 42# injectors, Ford 'focus' pump, Aluminum driveshaft | ||
| TehHorse (Russ) Dynojet SAE | 1995 | 5spd | 301.31 | 305.27 | Split Port Swap, 11psi Procharger, 42lb inj, 255lph pump, Pro-M MAF, LT headers, O/R H pipe, 160* thermo, tuned by Justin @ VMP. | ||
| Sinister | 2000 | 5-speed | 289.4 | 279.6 | Vortech V2 (custom setup using 94-98 kit), custom power pipe, 14 psi on stock pulley, 80mm Lightning MAF, 42# injectors, FMS 8.8 rear-end, 255lph, 160° thermostat, FMS Aluminum Driveshaft, high-flow H, 4.2 cam, Kenne Bell Boost-a-Spark | ||
| BigPimpJK | 2001 | 5-speed | 286.5 | 278.0 | Vortech V2SQ, 3.33" pulley (10 psi), ProM 75mm MAF, Ford 300lph Fuel Pump, 36lb Injectors, 180* Thermostat, Apten Performance DynoTune, JBA spark plug wires, Denso Iridium IT20 Sparkplugs, Dual 2.25" exhaust with Spintech Sportsman mufflers | ||
| captain (1) | 1999 | 5-speed | 273.1 | 350.2 | Compucar Dry Nitrous 90 shot, Mac Cold Air, MSD 8.5mm plug wires, Flowmaster custom bent dual exhaust, ASP underdrive, ported throttle body, Dynotune/Computer flashed, 4.10s and traclock | ||
| Brad Hunter | 1999 | 5-speed | 268.9 | 291.9 | GT30R turbo, 4.4psi, Custom TMA turbo kit, 03 cobra injectors, Lightning 90 mm MAF, Mangaflow High-flow cats, Flowmaster mufflers,ASP underdrive pulley | ||
| Shinerstang | 2001 | 5-speed | 267 | 385 | True dual exhaust, CAI, Xcal, 3:73's, and 75shot of Nitrous | ||
| Rookie | 2000 | 5-speed | 266.9 | 267.1 | 7psi ATI Procharger, 30# injectors, Pro-M Maf, 70mm BBK TB, 1.73 Motorsport Roller Rockers, MAC Longtube Headers, Custom H with magnaflow cats, dynomax mufflers, 3.73 gears, aluminum driveshaft, aluminum flywheel | ||
| Justang2K | 2000 | 5-speed | 264.8 | 280 | Stock 4.2L bottomend, Longtube headers, RPM Gen1 BV Heads, 207/215 camshaft, Stage 1 Lower and Modified Upper intake, MAC CAI, Dual Magnaflows w/ X-pipe, UD Pulley, 70mm TB | ||
| CDR Stang | 2002 | 5-speed | 261 | 282 | Cobra Eaton M112 Supercharger 5-6psi, inlet and throttle body, GT take-off exhaust, Focus 310lph fuel pump, Modified 99 Lower intake, Custom Aluminum Upper intake, Cobra 39# fuel injectors, Stock Cobra pulley (3.55"), 90mm Lightning MAF | ||
| Mustang94 (1) | 1994 | 5-speed | 259.6 | 347.0 | Everything below plus 150 shot of NOS nitrous and a seperate fuel cell for the nitrous | ||
| supersix stang on Mustang Dyno SAE | 2001 | 5-speed | 259.2 | 260.9 | SSM Hi-Po 4.3 stroker, 226/226 cam, SuperHeads, ported upper and lower intakes, 70mm TB, aluminum flywheel, 1.73 adj roller rockers, SSM forged rods and pistons (.045" over, 10.1:1 CR), MAC cold air, ASP UD crank pulley, ceramic coated MAC long tubes, dual exhaust, auto-to-T-5 swap, aluminum driveshaft, 8.8 w/4.10 gears | ||
| DerekLai | 2000 | 5-speed | 258.1 | 259.5 | Vortech V1, 255lph intank fuel pump, 30# injectors, 80mm Lightling MAF, Dual exhaust w/Flows | ||
| Talleywacker | 2002 | 5-speed | 250.84 | 249.76 | Truck. F150 4.2. 50 Shot Nitrous, Teran Racing Heads, 215/222 .599/.610 110LCA RGR spec cam, MAC CAI, ASP 50% UDP, No Cats, flowmaster Y, 3" warlock mufflers open, 1.8RR's, 80mm V8 MAF, AWSF32C .030 plugs, Stock Headers, 4.10's | ||
| Thor | 2000 | 5-speed | 236.7 | 228.2 | RPM Gen1 BV heads, 207/215 camshaft, stock intakes, Longtube headers, MAC CAI, Dual Flowmasters (No H-pipe) | ||
| Matthewneuharth (2) Mustang Dyno SAE | 1995 | Tremmec 3550 5-speed | 224.8 | 282.1 | 4.2L, 8.2:1 compression, stock headers, mac prochamber, flowmaster duals, 218/224 (.555/.555 112*) Camshaft, Roller Rockers, Ported Heads and Intakes, Ported TB, MAC Cold Air, 75mm MAF, Underdrive Pulley, 24# injectors, 190lph fuel pump | ||
| taylor0987 | 1994 | 5-speed | 222 | 212 | Gaston ported split port heads & lower intake,upper intake with posts removed, 207/215 cam with 1.8 rr .511/.513 net lift & Gaston springs, stock MAF, eBay CAI, half-shafted stock TB, 25% UDP, 24# injectors, 255 lph fuel pump, MAC longtubes, 2.5" inch exhaust into magnaflow cats and Borla mufflers, spec stage 2 clutch, aluminum driveshaft | ||
| 99ChromeCoupe | 1999 | 5-speed | 220.1 | 216.8 | Home-P&P'd Upper/Lower intake and heads, Comp Cam (211/216 .484/.479 110*), Comp Cams pushrods, FRPP 1.73 RR's, Fordchip dynotune, ASP UD pulley, ProM 75mm MAF, MAC CAI, Aluminum driveshaft | ||
| TuxMask-Andy | 1999 | 5-speed | 219.2 | 213.0 | SuperSix PowerPak, CAI, Crowler Cam 214/218 .483/.483 108 lobe separation, Long tube headers, Underdrive Pulley | ||
| NMStang218 | 1998 | 5-speed | 217 | 216 | 2.5" Dynomax Catback w/ Force ProStreet Mufflers, Mac Long Tubes w/ O/R H-pipe, Custom DynoTunes by AZDyno Chip, FRPP Aluminum driveshaft, FRPP 3.73 Rear gears w/ T-Lock, Split port swap, G-10 3/8" intake spacer, Mac UDP, 1.8 Harland Sharp RRs, Ebay CAI, SSM Ported Upper Intake, RPM Ported Lower Intake, RPM Ported Heads | ||
| Matthewneuharth (1) | 1995 | 5-speed | 210.3 | 246.1 | 3.8L MAC LT's, Dr. Gas O/R X-pipe, Flowmaster 40 series catback, DIY Ported heads/intakes/TB, MAC CAI, UD Pulley, heads milled .030, Comp Cam (218/224 .555/.555 112*), Comp Pushrods, 19# injectors, 190lph fuel pump | ||
| BigPimpJK | 2001 | 5-speed | 187.4 | 213.1 | ASP UD Pulley, True Dual Spintechs (no X-over), Full-length densecharger, Jacobs wires, 32C plugs, Apten Performance dynotune (before/after shown) | ||
| captain (2) | 1999 | 5-speed | 181.3 | 199.5 | No Nitrous on this run, Mac Cold Air, MSD 8.5mm plug wires, Flowmaster custom bent dual exhaust, ASP underdrive, ported throttle body, Dynotune/Computer flashed, 4.10s and traclock | ||
| Mustang94 (2) | 1994 | 5-speed | 174.5 | 205.7 | K&N air filter, Underdrive pullies, BBK fuel regulator, 155lph fuel pump, Jacobs ignition, Fordchip, Flowmaster dual exhaust, cam cam 224 int 224exh 520 lift with new valve springs, 1.73 RR, P&P heads milled .020, longer push rods, P&P lower intake, forged Diamond pistons, shotpeened rods, #24 injectors | ||
| VSOP | 2000 | 5-speed | 164.9 | 211.4 | VMP CAI, 65MM TB, Gutted Stock MAF | ||
| Aaron Ward Dynojet SAE | 1998 | 5speed | 140.5 | 208.9 | Dual Exhaust, Ebay CAI, 25% UDP | ||
| Rebecca | 1995 | 5-speed | 128.3 | 209.5 | Stock with 90k miles | ||
| Paul | 1995 | 5-speed | 125.5 | 187.2 | '98 engine, K&N airfilter | ||
| Super Six Not SAE Corrected | 1994 | 5-speed | 328.6 | 322.1 | Super Six Motorsports Stage 4+ PowerPak, ported cylinder heads, ported intakes, 214/214 .48/.48 110 separation cam with stock valve springs, 56mm throttle body, 190 pump, Pro-M MAF, #30 injectors, Vortech V-2SQ, 3:1 FMU | ||
| Ghostrider99 Not SAE Corrected | 1999 | 5-speed | 321.61 | 329.37 | 3.8, 70mm throttle body,P&P Uppr/Lowr Intakes, Max ported heads,RPM 207/215cam,Vmp PMAS Maf,Blow through-13PSI procharger stage2 intercooler,tuned by Powertraindynamics.com | ||
| BlueMuscle Not SAE Corrected | 2000 | 5-speed | 263.6 | 264.0 | V2 Vortech pushing 10PSI, Dual Exhaust | ||
| SpoiledV6 Not SAE Corrected | 2000 | 5-speed | 246.37 | 341.59 | 3.8, ported upper, UDP, Cam, MAC Full Exhaust with Lt's. 3.73's 70mm tb | ||
| Sprayed Super Six Not SAE Corrected | 1998 | 5-speed | 217.2 | 249.1 | MAC CAI, 70 mm Pro-M MAF, BBK 56mm TB, Super Six p&p'd intakes, Super Six Super Heads, Crower Cam (222/230 .530/.530 ???*), Trickflow rods, Super Six adjustable 1.73 RR's, Wiseco forged pistons w/ 10.3:1 compression, Super Six forged raced-prep'd rods/crank, bullit flywheel, 24# injectors, 255lph fuel pump, adjustable fuel pressure regulator, aluminum drive shaft | ||
| Super Six Not SAE Corrected | 1994 | 5-speed | 185.8 | 232.2 | Super Six Motorsports Stage 3 PowerPak, ported cylinder heads, ported intakes, 214/214 .48/.48 110 separation cam with stock valve springs, 56mm throttle body, 190 pump, ASP underdrive crank pulley | ||
| l_Shizzle_l Not SAE Corrected | 5-speed | 182 | 214 | 1/2" intake spacer, Mac Longtube headders, Mac O/R h pipe | |||
| CanSPeed Not sure if SAE Corrected Clayton Dual Roller Dyno | 1996 | 5-speed | 161.1 | 231.4 | K&N filter, Dual Exhaust, MSD Wires, Kevlar Clutch, SMT6i Perfect Power Piggyback | ||
| IMHIP2 Dyno Sheet missing | 1999 | 5-speed | 142.4 | 192.9 | MAC CAI, True Duals (No H-pipe) | No Graph | |
