View Full Version : Drivetrain
- Need help! Double-check my T-5 parts list
- Stock stall Torque Converters - SS
- Jerry mod people
- C4 Automatic Tranny (4speed)
- PA New Full Auto TransBrake Valve Body
- 7.5 Detroit Truetrac - T-lck
- what's so special about torque convertor nuts
- 28-spine yoke - 4R70W
- Built 4R70W
- Len Tech Automatics vs Performance Automatic
- Jerry Mods for Automatic Transmissions
- 4r70w Horsepower Limits
- BC-Automotive
- Weight of 4r70w?
- AODE to 4r70w swap, won't change gears?
- help! top bellhousing bolt stuck
- So I decided to go with 4.10s, quick Question
- Another Drivetrain Question.
- question on valve body kit
- shifter boot thingie???
- TRANS ?
- Transmission Temp Gauge.
- Drivetrain related question
- tranny & converter question
- Well sence theres no drivetrain section I have to ut it here. 7.5 vs 8.8 rearends.
- First Post...
- 4r70w
- 01-04 -Spec Flywheels, springhub clutch, and a viper spec T-56?
- Reverse band failure
- Ok I need some help!!! ( that awould be in a real bad way)
- Flywheel questions
- Whats stronger 05+ 5 speed auto or 4r70W
- 3.45 gears?
- What is this place?
- any tricks to removing the torque converter from the flexplate?
- cant find the updated aode rebuild list
- P.I Torque converter question(MIlan)
- 2001 5 speed
- Cobra Flywheel and clutch
- Question about installing B&M Tranny Cooler...
- t5 from fox mustang in 2004 v6?
- will this 8.8 fit?
- ford tlok or detroite tru trac
- Tore gears off the 7.5"
- wow new area ...
- tranny 'slipping' under heavy rain, tc studder? issues?
- Question about Flywheels/clutch/and LSD.
- Choosing the right gear ratio
- Question about upgrading the brakes.
- g force t5 ?
- broke my 7.5. what needs to be done to use a Turbocoupe rear on my 94?
- bolting up a clutch for the first time
- Swapping to 5spd next year...
- 3.73/Trac-Lok...
- Differences between AODs and 4R70Ws?
- I need a new tranny
- Strength of 7.5 rear, and stock 4r70w
- how undriveable is a spool on the street
- Busted up clutch cable??
- valve body's who makes them
- is this an 8.8 or 7.5?
- More clutch problems.
- 05 crown vic rear
- Cobra IRS would ya
- whats does 4 R 7 0 W stand for?
- what do I need to do to this 8.8 so I won't break it w/slicks
- Any idea whats required to mate a V6 T-5 to a 5 liter?
- what do I need to install an aod
- 4.56 gears need advice
- Driveshaft studs
- do 31 spline axles and diffs take more power to turn then 28?
- Aluminum Driveshaft
- Nitto drags and ford t-lok question
- Clutch Q
- Clutch/flywheel question
- T5 fluid
- 5.0t5 work on a v6
- rear wheel stud replacement question
- Anyone with a Double hooking Clutch quad
- Which diff
- With my set up, 5 spd or tc?
- finally found out what I broke in my rear *carnage pics*
- Stronger manuals for v6es?
- Valve Body for a 4R70W
- Forward Clutches for a 4R7W
- Rear end compatibility question?
- 410s on a automatic 2003
- Marauder TC
- Production Driveshaft Lengths
- Transmission options? 99 V6...
- simple question
- rear end swap
- Rear end upgrade help
- Differential questions for autoX /roadrace
- Want to do J-Mod
- Alum. driveshaft info
- SPEC FLYWHEEL HELP
- LSD clutches....
- Trans temp gauge..electric or manual
- my new parts.
- OD Light is Flashing On/OFF
- shift points
- QUAIFE or TORSENS in mustangs?
- Wierd clutch pedal feel...
- Info on the D-2 shift please
- shift kits
- 99-04 Axle
- Learning about the rear-end
- aluminum driveshaft
- Light flywheel
- jmod with 410s on my 2003 auto
- PLEASE HELP, no one has 410 gears
- 8.8 Build up
- Is a transbrake a must with a TQ
- How long do 4R70W transmissions last?
- Differences between mustang rears - by year
- Tranny Experts! Need info for tranny swap...
- t5 / t45 whats the difference
- what are the pros and cons of a stall 3000
- What do i need to support 350-400 wheels on my stock rear end?
- Which flywheel do I need?
- 4r70w performance
- J-mod 450-625 HP Level?
- Shift Kits?
- gear swap for a 7.5
- detroit tru-track diff info
- gearing in my 8.8 3:73's to 3:55's
- Pinion Seal
- Superior Shifter?
- Driveshaft loop
- 01 auto tranny
- clutch giving up?
- v6 mustang new rear
- Mustang Differentials, Help not urgent!
- c4 transmission questions
- 4r70w questions.
- I'm buying an alum d/s, have yoke question
- 06 al driveshaft
- will s197 8.8 rearends fit in sn95
- Recommend a clutch..
- Strength of the stock T-5
- T-lok vs Tru-track
- 96 4r70w to 03 4r70w tranny swap
- Why not to get an auburn 7.5 diff...
- Rear End Suggestion
- Opinion needed on pedal stop
- Explain differences in flywheel for these years
- will a 1998 Explorer 8.8 fit my mustang (99-04)?
- Rear end question
- HELP, anyone know what
- 7.5 question
- c4 converter questions
- Richmond 4.10 and ford t-lok
- is it difficult to assemble a 8.8 rear end?
- J-Mod questions
- Video instructions for swapping valve body
- 1992 Mercury Cougar 3.8
- How much could I get...
- Is my T5 clunking?
- C4 trans swap
- Is it possible... (TKO 600)
- HAYS CLUTCH KIT
- J mod trouble help needed
- is a truetrac install kit different than one for a tlok?
- has anyone broken a T5?
- i want an AODE too handle 400hp+
- jmod questions
- Higher Stall
- 8.8 mark VII
- pressure plate recommendation
- Anyone have links to TC's?
- 1998 Valve body
- Gear ratio question
- 5.0 Bellhousing
- AOD swap project
- rear end?
- squeeking comming from tranny area?
- Getting my T5 donor stang this weekend...
- T5 manual trans fluid..
- gears??
- posi? what is it??
- 373 or 410s
- 02 T5 to 95 AODE question
- Boost and the transmission
- 5 spd wiring harness
- AODE to T5 driveshaft question
- T5 driveshaft...
- trans and rear in a 91 lx convertable
- 95 AODE to T5
- 7.5" t-lok
- Panther platform trans question...
- why would my clutch wear this way
- Lots of clutch chatter......
- To Jerry mod...or not to Jerry mod
- Rear End or Rear axle clunk/knock
- Cutting trans tunnel for t5 swap...
- 7.5 Rear....how much can it handle?
- Speed-Cal question
- Having problems getting trans to mount to bellhousing...
- how to use a 99+ t5 in a 94-98
- I think my third gear is laying in the road somewhere???? help please!!!!
- different jmod questions
- What's needs to be upgraded on 4R70W to get it to handle over 550rwhp/rwtq?
- what can it be
- rear end upgrade
- TC Differences between the years?
- FRPP T5Z in my 99
- guys with PI torque converters
- TKO-600 or 500
- my "new" 5 speed is noisy-is this OK
- question changing from auto-standard shift
- pics of V8 clutch (10.5") on a v6 (11" spec Aluminum Flywheel)
- trans temp gauge
- 8.8" rear
- T/A girdle question
- speedo gear question?
- best web site to buy spec alum clutch
- part #for 94-94 T-5 tranny needed
- 00-01 rear end switch
- Pinion angle question
- What rear end?
- Transmission rebuild Q's
- What are my clutch options?
- HELP!!! where does this piece go?
- Wierd transmission issue
- AOD to supercoupe 3.8?
- steel driveshaft
- Accumulator springs
- T5 steel bearing retainer
- rear end noise
- Need Help to Install Converter to Flywheel
- Automatic Transmission Cooler
- General tranny
- so i have a 3800 stall TC
- Sold my T-56
- tranny help asap
- 4:10 gears
- Where to get MGW Shifter?
- rpm's @ 70 mph 3.73 gears
- Transmission
- What are my options as far as clutches?
- Need to rebuilt my tranny
- good price on gear and t-lok install
- clutch install
- tranny swap
- Speedo Gear vs Speed Cal
- How good is the stock flywheel and clutch?
- what transmission comes in the 05+ V6s?
- 10.5" Clutch ...
- 98 mustang transmission
vBulletin® v3.6.4, Copyright ©2000-2010, Jelsoft Enterprises Ltd.