PICS inside: boost gauge, airfuel gauge

[pinoyfosho]

im installing boost a fuel gauge, for the boost gauge is this where i can T it?
http://www.mustangmods.com/publish/pinoyfosho//T_boost%20gauge.jpg
can i just cut where the black plastic thing is, cut it, and then T it ??

and this is for the air fuel ratio gauge..is this the 02 sensor wire i need to splice?? im not sure...
http://www.mustangmods.com/publish/pinoyfosho//02sensor.jpg

thanks for all your help! pics would make it a lot easier for me ..thanks again! =)

[ March 11, 2003: Message edited by: pinoyfosho ]</p>

[majorbta]

i t'd mine on the top one of 2 vacumm fittings on the right side of the upper towards the front

[pinoyfosho]

is it ok where i took this picture, to T my boost gauge?

and is that the 02sensor??

thanks!

[gitman]

um the o2 sensor hooks up to the exhaust..

[pinoyfosho]

i mean the "02 sensor wire" i need to connect my air fuel ratio gauge to...

this is a pic the 02 sensor plug on a 98 v6 ..
http://www.ofoto.com/PhotoView.jsp?UV=591593515591_71013396205&collid=18742396205&photoid=97742396205

(thanks Ian)

thanks for ur help, major and gitman!!

[finda1yola]

actually...I that last pic os from a 96....not a 98. But its al good....just giving you a hard time bro....a1 images/smiles/icon_biggrin.gif

[OneQuickSix007]

which wire is it on that plug?

[pinoyfosho]

i think its the one that goes to my intake i think its called IAT? ICT? something like that.. but im not sure if its the right plug.. i'm looking all over the engine bay for a plug that has 4 wires...and yah, so im kinda lost..

sorry guys..
thanks for ur help!

[klonoa]

http://www.knownick.net/albums/nbmc2/IMG_1411.sized.jpg

Kinda of a far off pic, but you can see the white T from there.

[pinoyfosho]

Onequicksix, where is the 02sensor plug, plugged into in the engine bay??

Klonoa,
so you t'ed it over there.. that hose said something like gas/air..or something like that.. but neways its the fat hose right next to the one i took a picture of ... that is where u t'ed it.. ?? can u please take a close pic .. i would appreciate it bro.. thanks!

[mustang01]

How and where do you put the 2 wires that are supposed to turn on the bulb inside the gauge?

Could someone explain and possibly post pics? I dont want to jack up my electrical wires..

[klonoa]

Yeah, thats pretty much the only thing that is stopping me from putting the guage in right now, the electricasl wires.

[mustang01]

I want the gauge lights to come on when our lighting pull button is at halfway, when the speedo/front side lights come on, and when the full headlights are on.

Anyone have pics of the exact wires you have to wire?

[Tre]

Look in your manual for the right fuse. If I remember right its like the 2nd wire back and the 2nd wire in from the back right corner of the fuse panel. Anyway, the manual has it, just use that wire.

[waterman]

or what i did was just grab a multi-meter and test the plugs on the back of the guage cluster for the conection that powers the lights. I dont remember what color it was but it was a larger pin than the rest. It only took 10-15 mins and worked out great.

[waterman]

Or if you dont have a meter, just get me a pic of the plugs and I'll show which pin it was ( If you still don't know which wire)